Motion CFT-003 User's Guide download pdf (Page 76)

Chapter 4 Troubleshooting and FAQs Troubleshooting 70

The pen function button doesn’t work

• You may not be pressing the button early enough. Try pressing and holding the pen

function button before you touch the pen to the display surface.

• The pen function button may be disabled. To enable it, open Motion Dashboard, then

tap Pen & Tablet. Tap Pen & Input Devices and tap the Pen Options tab. Tap the

checkbox next to “Use the pen button as a right-click equivalent.”

The eraser doesn’t work

• The eraser may not be enabled. You can use Tablet and Pen Settings window to enable

the eraser. See Adjusting pen settings on page 23. The eraser works on digital ink only,

not text.

On-screen instructions require me to press Enter or Esc, but I don’t have a keyboard

• Connect a keyboard to the tablet to continue.

The C5t/F5t responds to my finger but not my pen

• The tablet may be configured to ignore pen input. To check, open Motion Dashboard,

then tap Pen & Tablet. Tap Touch Settings and tap the Digitizer Options tab. Set Input

mode to the recognize both touch and pen.

The C5t/F5t tablet is too sensitive to touch

• Consider changing a touch setting so that you have to double-tap the display to enable

touch. Open Motion Dashboard, then tap Pen & Tablet. Tap Touch Settings and then

Auto mode.

The pointer on the screen doesn’t align with the pen

• The pen may need to be calibrated. Open Motion Dashboard, then tap Pen & Tablet,

and tap Calibrate digitizer. The calibration program begins. Don’t touch the display

until the program has finished.

Ports and connectors issues

The tablet doesn’t recognize the USB device

• Windows® 7 may take a short time to recognize the USB device. Wait a few moments to

see if Windows® recognizes the device.

• The device may not be connected properly. Check the connection and ensure it is

inserted properly into the USB port.

• The correct driver might not be included with Windows® 7. Check the manufacturer’s

website for a current driver.

The C5t/F5t is in its dock, but the tablet doesn’t recognize any accessory devices, such

as the external disk drive or monitor

• The C5t/F5t may not be fully seated in the dock. Remove it from the dock and then

replace it.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 86 87

No comments

Motion CFT-003 User's Guide Page 76