Motion CFT-003 User's Guide download pdf (Page 51)

Chapter 2 Using your C5t/F5t Using Wi-Fi (802.11a/g/n) 46

Changing how the power button functions

When you press and release the power button, it can go into one of the following modes:

• Sleep—The tablet pauses all activity immediately and quickly resumes when awakened.

This saves power when you’re away from your tablet for a short time. However, you will

lose unsaved data if there’s a power failure.

• Hibernate—The tablet saves the contents of memory to the hard drive and shuts down.

Pressing the power button restores the desktop exactly as you left it. Hibernate

consumes about as much power as a night light and takes less time to restart than the

Shut down option.

• Shut down—Tablet shuts down. Pressing the power button reboots the tablet.

By default, the tablet goes to sleep when you press and release the power button . To

wake up your tablet, press and release the power button again. You can put the tablet in

Hibernate mode or shut it down completely from the Start menu.

You can change how the power button behaves when it is pressed either to hibernate or to

shut down the tablet. You can set the behavior individually, depending on whether the

tablet is running on battery or plugged in.

To change what happens when the power button is pressed:

1. Open Motion Dashboard.

2. Tap Power.

3. Under Power Switch on battery, select what you want to happen when the power

switch is pressed while the tablet is running on battery.

4. Under Power Switch plugged in, select what you want to happen when the power

switch is pressed while the tablet is plugged into an outlet.

Using Wi-Fi (802.11a/g/n)

Use the information in this section to set up a Wi-Fi connection. Wireless access requires an

appropriate access point. Internet access requires a working Internet connection.

DANGER: FAA regulations require that you disable any wireless connection when traveling

by air. Failure to disable the wireless connection on the system while traveling by air can

cause communications problems with aircraft instruments.

Enabling or disabling Wi-Fi

Before you can establish a Wi-Fi connection, you must enable the Wi-Fi adapter. You can

enable the Wi-Fi adapter using Motion Dashboard.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 86 87

No comments

Motion CFT-003 User's Guide Page 51